Page 1 of 2
n00bie question from me
Posted: Sun Jun 08, 2003 6:01 pm
by iNViSiGOD
Ok, i run WG3.30, MajorMUD 1.11m and have run into a bit of a snag. Recently our clientel on Lunar Dynamics has grown to colossal proportions. I have roughtly 75+ people trying to get in, but its only allowing for 65 to log in at once.
I have it changed in the conf to allow up to 130 connections but it didnt help.
I feel it may be my license key but i could be mistaken because im sure i purchased an unlimited license for worldgroup. Any suggestions? :ehh:
Re: n00bie question from me
Posted: Sun Jun 08, 2003 6:07 pm
by BlackHaze
Maybe add more channels in group 2?
Re: n00bie question from me
Posted: Sun Jun 08, 2003 6:27 pm
by iNViSiGOD
Tried that,went channel 1 was 01-65 then channel 2 is 66-130
Re: n00bie question from me
Posted: Sun Jun 08, 2003 6:38 pm
by BlackHaze
And you tried simply adding 130 to channel group 1 right?
Maybe go for a lower number like 100?
Re: n00bie question from me
Posted: Sun Jun 08, 2003 7:22 pm
by Demonic
I have no clue if it would work or not, but have you tried to add a 2nd or 3rd channel from the hardware setting?
-Core Hardware Setup
-----GROUP1 - TCP/IP
------------START1 - 1
------------NUMBR1 - 255
-----GROUP2 - TCP/IP
------------START2 - 2
------------NUMBR2 - 255
-----GROUP3 - TCP/IP
------------START3 - 3
------------NUMBR3 - 255
I dont know if that would help or not. I have never seen a board with that many people on it. It's worth a try tho.
Maybe try to set up group1 from start # - 50, group2 from 51- 100, and group3 from 101 - 255.
*Also, it should tell you when you start your board if have the correct license number activated.
Re: n00bie question from me
Posted: Sun Jun 08, 2003 8:24 pm
by iNViSiGOD
Checked it, says i have a 256 user license in the audit trail. Im really damn confused,hasnt anyone else hit the 65 user mark?
Re: n00bie question from me
Posted: Sun Jun 08, 2003 8:51 pm
by BlackHaze
I only wish haha.. maybe set it up for 256 lines
Re: n00bie question from me
Posted: Sun Jun 08, 2003 10:52 pm
by iNViSiGOD
Well crap, this isnt looking good for us,its worse than waiting in line at a fuckin KMART!
Re: n00bie question from me
Posted: Mon Jun 09, 2003 10:47 am
by syntax53
Originally posted by Demonic
-Core Hardware Setup
-----GROUP1 - TCP/IP
------------START1 - 1
------------NUMBR1 - 255
-----GROUP2 - TCP/IP
------------START2 - 2
------------NUMBR2 - 255
-----GROUP3 - TCP/IP
------------START3 - 3
------------NUMBR3 - 255
wouldn't this be wrong? i had always thought you would need to do:
-Core Hardware Setup
-----GROUP1 - TCP/IP
------------START1 - 1
------------NUMBR1 - 60
-----GROUP2 - TCP/IP
------------START2 - 3D
though, having only a group 1 with start-1 and number-200 SHOULD be fine.
Re: n00bie question from me
Posted: Mon Jun 09, 2003 1:16 pm
by MrBlack
I thought the start1 should be 0